Plasma enhanced chemical vapor deposition (PECVD) and electron cyclotron resonance (ECR) etching were used in the development of silica layers for planar waveguide applications. The addition of GeH4 to silica was used to control the refractive index of core layers with core-to-clad index differences in the range of 0.2%-1.3%. Refractive index uniformity variance of +-0.0003 was achieved after annealing for 4-inch Si <100> wafers. The core layers with thickness up to 6 μm were etched by ECR with optimized recipe and mask material. Low-loss silica-on-silicon waveguides whose propagation loss is approximately 0.07 dB/cm at 1550 nm are fabricated.

The performance of the algorithm of the data channel scheduling algorithm of latest available unscheduled channel with void filling (LAUC-VF) under bursty traffic is presented firstly. A bursty traffic model for optical burst switch performance simulation is also introduced.

In this paper, we proposed a novel optical switching method based on optical burst switching (OBS), we call it variable time-period optical switching (VTPOS). It can both support circuit services and other immerged packet services. It has better usability of bandwidth, shorter offset and latency time than others of unidirectional transport signaling mechanisms for OBS. It supports deflection switching for improve blocking performance without the need of schedule buffer. It introduces a time pointer and phase indicator that made synchronous more precisely and requires less guard time, it also classifies the different services classes with a relative QoS model.

本文初步探讨了脉冲激光焊接中,焊点熔池出现的一些熔合不良的缺陷,分析了缺陷产生的原因,并研究了可能避免缺陷产生的方法.